Ultra alkaline electrolyzed water has the functions of carbon free oil removal and natural rust prevention, making it an excellent environmentally friendly cleaning solution. It not only has a fast oil removal speed, but also has a rust prevention effect on the surface of metal parts, while reducing the environmental pressure of production pollution discharge for enterprises.

As is well known, in the industrial field, it is necessary to clean the machined parts and finished products to remove oil stains on the surface of the parts. In the past, chemical cleaning agents such as caustic soda or other volatile cleaning agents were commonly used. The volatile cleaning solution used in factories can cause volatile gases to diffuse into the air during the cleaning and drying process, which can immediately cause an explosion if exposed to an open flame. Chemical cleaning agents will generate a large amount of waste liquid in cleaning projects, and direct discharge will bring huge pollution to the environment. Waste liquid treatment will also increase the cost of enterprises. And caustic soda and other substances have extremely strong corrosiveness, generating high heat when dissolved in water. Once human skin comes into contact with it, it will feel strong irritation, causing burns and threatening the personal safety of operators. And traditional cleaning agents need to be cleaned again with clean water after use, while super alkaline electrolyzed water is non-toxic, non corrosive, odorless, non flammable, pollution-free to the environment, and has good oil and rust removal effects. After use, the parts can be directly dried without further cleaning, which not only simplifies the process and saves production costs, but also can be reused while maintaining a certain alkalinity and pH value. After use, the residue can be naturally reduced and safely discharged.

The mechanism of super alkaline water oil removal is that oil stains adhere to the surface of the material, and the fine water molecules after electrolysis invade the gap between the oil stains and the material surface. The hydrophilic H-O-H (alkaline electrolyzed water) combines with the hydrophobic H-O (attached oil) to form a molten state of oil and water, and the negative ions of the electrolyzed water wrapped around the oil stains repel the negative ions on the material surface (most pollutant ions have a strong negative potential, and many surfaces to be cleaned also have negative charges). Therefore, the oil stains attached to the surface of the cleaned object will be quickly emulsified and detached from the attachment.

The mechanism of super alkaline water oil removal is that oil stains adhere to the surface of the material, and the fine water molecules after electrolysis invade the gap between the oil stains and the material surface. The hydrophilic H-O-H (alkaline electrolyzed water) combines with the hydrophobic H-O (attached oil) to form a molten state of oil and water, and the negative ions of the electrolyzed water wrapped around the oil stains repel the negative ions on the material surface (most pollutant ions have a strong negative potential, and many surfaces to be cleaned also have negative charges). Therefore, the oil stains attached to the surface of the cleaned object will be quickly emulsified and detached from the attachment.

Fang Xin super alkaline electrolyzed water removes oil stains (kitchen range hood fan blades):

Due to the non corrosive nature of ultra alkaline electrolyzed water, it poses no harm to the human environment. The discharge of waste liquid does not cause environmental pollution and can be used in any situation to clean oil stains. Its cleanliness, safety, and economy are unmatched by other cleaning agents. Using ultra alkaline electrolyzed water to remove oil stains can greatly reduce the rinsing process, thereby lowering the cost of cleaning and wastewater treatment.

Experimental study on anti rust treatment of Fangxin electrolytic super alkaline water:

Soak the SPCC plates in flasks containing tap water and square core ultra alkaline electrolyzed water with a pH value of 12.5. The SPCC plates soaked in tap water only began to rust after 2 hours, while those soaked in square core ultra alkaline electrolyzed water with a pH value of 12.5 did not show any rust.

After cleaning with ultra alkaline electrolyzed water, it is necessary to blow away the cleaning solution with dry air to maintain rapid drying and enhance the rust prevention effect. Repeated cleaning requires removing the dirt and residue mixed in the cleaning solution from the cleaning solution to ensure the surface cleanliness of the cleaned parts. When the pH of the cleaning solution drops to the set value, add new cleaning solution to maintain it. After cleaning with super alkaline water, there is no need to rinse with clean water again. If rinsed with clean water, the rust prevention function will be lost. After cleaning and drying, it is necessary to quickly apply oil for rust prevention.

In addition to its rust prevention function, Fangxin super alkaline electrolyzed water can also be used as a coolant for cutting and grinding machines, changing the oil pollution caused by factory cooling oil to the workshop air in the past, and improving the factory air and usage environment. Fangxin super alkaline electrolyzed water does not contain any carbon elements or organic matter, and its use is completely unrestricted by environmental policies. It is a truly green and environmentally friendly product. And the cost is lower than traditional cutting oil, and it also has anti rust function.

Ultra alkaline electrolyzed water can also be used for precision cleaning in military industry, nuclear industry, optical lenses, glass, and LCD panels.